@ben_van Hi, thank you, works perfectly

@ahoa4149
Hello,
The FabLab will be open throughout the mid-semester break, except on public holidays Friday (Mar 29th) and Monday (Apr 1st).
For prints today the earliest time for collection would be Tuesday, Apr 2nd.

@RdzorDr95
Hi David,

Thanks for joining the forum.
The NUPBOX is capable of printing Polypropylene. However, a print platform coated with Polypropylene tape or MagigooPP will be required. I recommend using MagigooPP for more reliable results.
Once you have the filament and suitable platform adhesive, please book a consultation with me to configure a new profile so we can add PP to the list of filament presets for the NUPBOX.

@jzhu3707
I recovered the settings from the gcode file on the server.
In prusaslicer go to

And select this file

wing_settings.gcode

@pphi4608

Hi!
Are you looking to hide the layer lines on the prints or just paint a specific colour?

@zzha1258

Hi Victor,
Thanks for joining the forum.
We use E3D-V6 compatible nozzles on the Nupbox printers. Here is a great article that goes into more detail about some different options:
https://www.lpomykal.cz/v6-v5-brass-nozzles/

If purchasing a nozzle for use with carbon or metal fill filaments, it must be abrasion resistant. Tungsten carbide nozzles are a great option and are available from PhaserFPV https://www.phaserfpv.com.au/collections/3d-printer-nozzles/products/phaetus-tungsten-carbide-175mm-nozzle-ps-m6-v6-nozzle

Our standard nozzle diameter is 0.4mm. If you’d like to experiment with other options, that will be fine however we will need to change the machine back to its standard configuration after each job.