Single Layer wing 3D print

[jzhu3707]

Hi Ben,
I forgot what you did to the print settings for my lightweight 3D printing wing.
I want to re-create and print the other half of the wing.
Can you help me get the settings on this one?

Thanks.

Best Regards,
Jiajun

[ben_van]

@jzhu3707
Hi Jiajun,

Do you have the exported gcode for the wing that was printed or is it still saved on the dashboard?
All settings are stored in the gcode file which can be re-imported back into prusaslicer.

Otherwise I’ll try to guess what settings were set

[ben_van]

@jzhu3707
I recovered the settings from the gcode file on the server.
In prusaslicer go to

File -> import -> import config..

And select this file

wing_settings.gcode